Control Panel - Konica Minolta bizhub c650 User Manual

Overview of the User Box functions
1.3

Control panel

Use the control panel for User Box mode operation. The following keys and switches are provided on the
control panel.
No.
1
2
3
4
5
6
7
8
9
C650
Downloaded From ManualsPrinter.com Manuals
22
21
20
19
18
17
16
15
Part name
Touch panel
Main Power indicator
Sub power switch
[Mode Memory] key
[Utility/Counter] key
[Reset] key
[Interrupt] key
[Stop] key
[Proof Copy] key
1
14 13 12 11 10
Description
Displays various screens and messages. Specify the various
settings by directly touching the panel.
Lights up in green when the machine is turned on with the main
power switch.
Press to turn on/off machine operations, for example, for cop-
ying, printing or scanning. When turned off, the machine enters
a state where it conserves energy.
Press to register (store) the desired copy/scan settings as a
program or to recall a registered copy/scan program.
Press to display the Utility screen and the Meter Count screen.
Press to clear all settings (except programmed settings) en-
tered in the control panel and touch panel.
Press to enter Interrupt mode. While the machine is in Interrupt
mode, the indicator on the [Interrupt] key lights up in green and
the message "Now in Interrupt mode." appears on the touch
panel. To cancel Interrupt mode, press the [Interrupt] key
again.
Pressing the [Stop] key during scanning temporarily stops the
scan operation.
Press to print a single proof copy to be checked before print-
ing a large number of copies.
Press the [Proof Copy] key before scanning or copying, the re-
sult can be viewed on the touch panel.
!
Detail
This key cannot be used if the [User Box] key was pressed
to save a document. To preview a document being saved
in a user box, press the [Fax/Scan] key. For details on pre-
viewing, refer to the User's Guide [Network Scanner Oper-
ations].
2
3
4
5
6
7
8
9
1
1-6