Operating The Attachment Lift Lever; Using The Attachment Power Lift; Positioning The Seat - Toro 72211 Operator's Manual

Children or bystanders may be injured if they
move or attempt to operate the tractor while it
is unattended.
Always remove the ignition and KeyChoice®
keys and set the parking brake when leaving
the machine unattended, even if just for a few
minutes.
Operating the Attachment
Lift Lever
The attachment lift lever (Figure 22 ) is used to raise
and lower various attachments.
Raising an Attachment
Pull attachment lift lever rearward until latch locks. In
this position the lift will hold the attachment in the up,
or raised position.
Lowering an Attachment
Pull attachment lift lever rearward, to release lift
pressure, and push the button on top to release the
latch. Move lift lever forward to lower attachment.
Figure 22
1. Lift lever
Using the Attachment Power
Lift
The attachment power lift (Figure 23 ) is used to raise
and lower attachments.
2. Button
Raising Attachments
1. Turn key to the on or run position (Figure 23 ).
2. Push the lift switch in the up direction to raise the
attachment lift (Figure 23 ).
This will lift and hold the attachment in the up, or
raised position.
Lowering Attachments
1. Turn key to the on or run position (Figure 23 ).
2. Push the lift switch in the down direction to lower
the attachment lift (Figure 23 ).
This will lower the attachment lift.
Figure 23
1. Key
2. Lift switch -up

Positioning the Seat

The seat can move forward and backward. Position the
seat where you have the best control of the machine
and are most comfortable.
1. Raise the seat and loosen the adjustment knobs
(Figure 24 ).
2. Slide the seat to the desired position and tighten
the knobs.
24
3. Lift switch -down