Operating The Attachment Lift Lever; Operating The Attachment Power Lift - Toro 79370 Operator's Manual

Warning
Tines can throw dirt, debris, and small rocks. The
operator or bystander could be injured by flying
debris.
Run the tiller so that debris is thrown away
from the traction unit.
Keep all bystanders away from the work area.
Operating the
Power Take Off (PTO) on 2001
and Newer Models
The power take off (PTO) switch engages and disengages
power to the electric clutch.
The PTO light, in the Indicator Module, will be on when
the ignition key is in run or lights position and the power
take off (PTO) is engaged. When this light is on it is a
reminder the starter will not crank and to turn the off PTO
before getting off the tractor.
Engaging the Power Take Off (PTO)
1. Move throttle to fast position.
2. Pull the power take off (PTO) to the on position
(Fig. 18).
1
Figure 18
1. PTO—Off
Disengaging the Power Take Off (PTO)
1. Push the power take off (PTO) to the off position
(Fig. 18).
2
m–4201
2. PTO—On
12
Operating the
Power Take Off (PTO) on 2000
and Older Models
The power take off (PTO) engages and disengages power to
the clutch.
Engaging the Power Take Off (PTO)
1. Depress the brake and/or clutch pedal(s) to stop the
machine.
2. Move the power take off (PTO) to on (Fig. 19).
Figure 19
1. Off—disengaged
Disengaging the Power Take Off (PTO)
1. Depress the brake and/or clutch pedal(s) to stop the
machine.
2. Move the power take off (PTO) to off (Fig.19).
Operating the Attachment Lift
Lever
The attachment lift lever (Fig. 20) is used to raise and lower
various attachments.
Raising an Attachment
1. Depress the clutch and brake pedals to stop the
machine.
2. Pull attachment lift lever rearward until latch locks. In
this position the lift will hold the attachment in the up,
or raised position.
Lowering an Attachment
1. Depress the clutch and brake pedals to stop the
machine.
2
1
2318
2. On—engaged