Table of Contents
Advertisement
Figure 8
1. Rear wheel
2. Wheel bolts
Refer to Checking the Safety Interlock System in
Operation, page 19.
Step
6
Checking the Tire Pressure
and Tractor Lubrication
No Parts Required
Procedure
Check the front and rear tire pressure. Refer to
Checking the Tire Pressure in the Maintenance Section.
Important: The tractor is shipped from the
factory with oil in the engine crank case.
Check the engine oil and add only enough oil to raise
the level to the full mark on the dipstick. Refer to
Checking the Engine Oil in the Maintenance Section.
Check the tractor to ensure it is lubricated. Refer to
Greasing and Lubrication in the Maintenance Section.
3. Wheel hub
Step
7
Reading the Manual and
Viewing the Safety Video
Parts needed for this step:
1
Operator's Manual
1
Engine Operator's Manual
1
Parts Catalog
1
Safety Video
1
Registration Card
1
Oil drain hose
Procedure
•
Read the Operator's Manual.
•
Learn how to operate the tractor. Read the
Operation section in this manual.
•
View the safety video.
•
Fill out the registration card.
•
Use the oil drain hose when changing the engine
oil.
Step
8
Checking the Safety System
No Parts Required
Procedure
If safety interlock switches are disconnected
or damaged the machine could operate
unexpectedly causing personal injury.
•
Do not tamper with the interlock switches.
•
Check the operation of the interlock switches
daily and replace any damaged switches
before operating the machine.
14
Advertisement
Chapters
Table of Contents
