Operation
Operating the
Power Take Off (PTO)
The power take off (PTO) engages and disengages
power to the clutch.
While the ignition key is in "RUN" position and the
power take off (PTO) is engaged, the PTO light in the
Indicator Module, will be "ON". When this light is
"ON" it is a reminder; the starter will not crank
Engaging the Power Take Off (PTO)
1.
Depress the clutch and brake pedals to stop the
machine.
2.
Push the power take off (PTO) lever forward to
engage (Fig. 19).
Figure 19
1. Engaged
Disengaging the Power Take Off (PTO)
1.
Depress the clutch and brake pedals to stop the
machine.
2.
Pull the power take off (PTO) lever back to
disengage (Fig. 19).
10
1
2
m–3430
2. Disengaged
Attachment Lift Lever
The attachment lift lever (Fig. 20) is used to raise and
lower various attachments.
Raising Attachments
1.
Depress the clutch and brake pedals to stop the
machine.
2.
Pull attachment lift lever rearward until latch
locks. In this position the lift will hold the
attachment in the up, or raised position.
Lowering Attachments
1.
Depress the clutch and brake pedals to stop the
machine.
2.
Pull attachment lift lever rearward, to release lift
pressure, and push the button on top to release
the latch. Move lift lever forward to lower
attachment.
2
1
Figure 20
1. Lift lever
2. Button
3
m–2514
3. Dial-A-Height