Using The Cruise Control - Toro 72211 Operator's Manual

Figure 27
1. Operate position
2. Push position

Using the Cruise Control

A three position switch, located on the dash
(Figure 28 ), with the functions of: Lock-Set (spring
loaded), On and Unlock-Off controls the engagement.
Cruise control maintains the traction control position
without foot pressure. Cruise control is intended for
operation in the forward direction only. Do not use
cruise control in reverse.
Engaging the Cruise Control
1. Begin driving tractor: Refer to Driving Forward or
Backward in Operation Operation, page 19 . While
holding your foot steady on the traction control,
push the cruise control switch (Figure 28 ) to the
lock-set position.
3. Drive control rod
Figure 28
1. Lock-Set
2. This locks the traction control in position and your
foot can then be removed from the traction control.
A constant ground speed will be maintained.
Disengaging the Cruise Control
1. While holding your foot steady on the traction
control, move the cruise control switch (Figure 28 )
to the unlock-off position.
2. This unlocks the traction control and your foot
then operates the traction control.
3. For quick stops, just press on the brake pedal. This
automatically disengages the cruise control and
applies the brake at the same time.
26
2. Unlock-Off