Multi-Switch Housing - Can-Am 2008 DS 450 Operator's Manual

vmo2008-011-005_b
Step 1: Squeeze front brake lever and maintain
Step 2: Move parking brake lever to desired
position
NOTE: Parking brake can be adjusted
in four (4) different positions.
vmo2008-011-006_a
PARKING BRAKE POSITIONS
CAUTION: Parking brake position
can vary depending on brake pads
wear. Ensure when the parking
brake is applied that the vehicle
stays securely in place.
To release mechanism:
front brake lever. Lever lock should
automatically return to its original po-
sition. Front brake lever should return
to rest position. Always release park-
ing brake before riding.

5) Multi-Switch Housing

The controls located on this multi-
switch housing are:
______________________
66
vmo2008-011-007_a
1. Headlamp switch
2. Engine stop switch
3. Engine start button
Headlamp Switch
vmo2008-011-008_a
HEADLAMP SWITCH FUNCTIONS
1. Headlamp switch
2. Low beam and taillight
Squeeze
3. High beam and taillight
NOTE: Place ignition switch to ON
"without light" or to OFF position to
close the headlamp.