Special Procedures; Turn Over; Vehicle Immersion - Can-Am 2008 DS 450 Operator's Manual

SPECIAL PROCEDURES

Turn Over

When vehicle is turned over or stays
tilted on the side, put the vehicle back
on its wheels, then wait 3 to 5 minutes
before starting the engine.
Inspect air filter housing drain tube for
oil accumulation, if any oil is found,
clean air filter and air filter housing.
Refer to MAINTENANCE INFORMA-
TION section.
Check oil level in oil tank and refill if
necessary.
Start engine and let it running, around
1 minute, then stop engine. Check
oil level immediately, refer to ENGINE
OIL LEVEL section for proper proce-
dure.

Vehicle Immersion

Should the vehicle become immersed,
it will be necessary to take it to an au-
thorized Can-Am dealer as soon as
possible. NEVER START THE EN-
GINE!
CAUTION: Immersion of the vehi-
cle can cause serious damage if the
correct restart procedure is not fol-
lowed.
_____________________
89