Fuses; Bulb Replacement - Can-Am outlander 400 Operator's Manual

WARNING
Connect RED (+) cable first then
BLACK (-) cable. Always connect
RED (+) cable first.

Fuses

WARNING
Always turn the ignition switch to
OFF position before replacing a de-
fective fuse.
If a fuse is damaged, replace it by one
of the same rating.
CAUTION: Do not use a higher rat-
ed fuse as this can cause severe
damage.
Fuses are located in the service com-
partment.
TYPICAL
1. Fuse holders
_____________________
120
vmo2006-005-029_a
1. Accessories (15 A) (power outlet and
auxiliary supply)
2. Fan (20 A)
3. Main (30 A)
4. Charging system (20 A)
To remove fuse from holder, remove
the fuse holder cover then pull fuse
out. Check if filament is melted.
TYPICAL
1. Fuse
2. Check if melted

Bulb Replacement

WARNING
Always turn the ignition switch to
OFF position before replacing a de-
fective bulb.
Always check light operation after re-
placement.