Brake; Inspection; Brake Fluid Replacement - Can-Am outlander 400 Operator's Manual

BRAKE

Inspection

The front and rear brakes are hydraulic
disc types. These brakes are self-
adjusting and require no adjustment.
The brake lever and the brake pedal
require no adjustment.
Check the following to keep the
brakes in a good operating condition:
– brake system for fluid leaks
– brake for spongy feel
– brake discs for excessive wear and
surface condition
– brake pads for wear, damage or
looseness.
SERVICE LIMITS
Brake pads
thickness
Front discs
thickness
Rear disc
thickness
Maximum discs
warpage
See your authorized Can-Am dealer if
a problem is detected concerning the
brake system.

Brake Fluid Replacement

WARNING
The brake fluid replacement or
any brake system repairs should
be performed by an authorized
Can-Am dealer.
_____________________
126
1 mm (.040 in)
3.5 mm (.138 in)
4.3 mm (.170 in)
0.3 mm (.010 in)