Quick Review; Date Stamp - NANO CAM NCP-DVRGPS User Manual

3.1.2.1 Quick Review

Quick review displays the photo on screen for the set amount of time after the
photo has been taken. To change the Quick Review setting follow the instructions
below.
1. Enter the Photo screen.
2. Press the Button to enter the Photo Menu.
M
3. Use the and
Review setting and press
4. Use the and
then press the
OK
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.

3.1.2.2 Date Stamp

Date stamp is used to stamp your photos with the time and date that they are
taken. To select your preferred time and date format follow the instructions below.
1. Enter the Photo screen.
2. Press the Button to enter the Photo Menu.
M
3. Use the and
Stamp setting and press
4. Use the and
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.
Buttons to navigate the Photo Menu and highlight the Quick
OK
to select.
Buttons to highlight your required image display time setting,
button to confirm your selection.
Buttons to navigate the Photo Menu and highlight the Date
OK
to select.
Buttons either Date, Date/Time, or ON, then press the
OK
21