Exposure; Motion Detection - NANO CAM NCP-DVRGPS User Manual

2.8.4 Exposure

Exposure is used to manually control the light sensitivity settings. To change the
Exposure setting follow the instructions below.
OK
1. Press the Button to stop the Car DVR from recording.
2. Press the Button to enter the Video Menu.
M
3. Use the and
Exposure setting and press
4. Use the and
OK
the button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.

2.8.5 Motion Detection

Motion Detection is used to pause recording when no motion is detected in front
of the camera, and to start recording when motion is detected again. To activate the
Motion Detection setting follow the instructions below.
OK
1. Press the Button to stop the Car DVR from recording.
2. Press the Button to enter the Video Menu.
M
3. Use the and
Exposure setting and press
4. Use the
and
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
Buttons to navigate the Video Menu and highlight the
OK
to select.
Buttons to highlight your required Exposure setting, then press
Buttons to navigate the Video Menu and highlight the
OK
to select.
Buttons to highlight either OFF or ON, then press the
OK
13