Format; Screen Saver - NANO CAM NCP-DVRGPS User Manual

3.2.7 Format

The Format setting is used to format the inserted Micro SD card. This optimises the
Micro SD for the NCP-DVRGPS and deletes all data from the inserted Micro SD card.
It is recommended that you format your Micro SD card before attempting to use the
NCP-DVRGPS. To format an inserted Micro SD card, please follow the instructions
below.
1. Ensure that the DVR is not recording.
2. Press the Button to enter the Video or Photo Menu.
M
3. Press the Button again to enter the Settings Menu.
M
4. Use the and
Format Setting and press
5. Use the
and
6. Use the and
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Settings Menu which can be accessed
via the Video and Photo Menus.

3.2.8 Screen Saver

The Screen Saver setting is used to set the duration of inactivity of the camera
before the screen goes into sleep mode. To set the screen saver follow the
instructions below.
1. Ensure that the DVR is not recording.
2. Press the Button to enter the Video or Photo Menu.
M
3. Press the Button again to enter the Settings Menu.
M
4. Use the and
Screen Saver setting and press
5. Use the and
press the button to confirm your selection.
OK
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Settings Menu which can be accessed
via the Video and Photo Menus.
3. Even when the screensaver is activated and the screen goes into sleep mode, the camera
will continue recording.
Buttons to navigate the Settings Menu and highlight the
OK
to select.
Buttons to highlight SD Card, then press the
Buttons to highlight OK, then press the
Buttons to navigate the Settings Menu and highlight the
OK
to select.
Buttons to highlight your preferred duration of inactivity, then
OK
button.
OK
button.
25