Sequence; Quality - NANO CAM NCP-DVRGPS User Manual

3.1.3 Sequence

When Sequence is activated, when a photo is triggered a sequence of 3 photos is taken. To activate or deactivate
Sequence mode, follow the instructions below
1. Enter the Photo screen.
2. Press the Button to enter the Photo Menu.
M
3. Use the and
Sequence setting and press
4. Use the and
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.

3.1.4 Quality

Quality sets the image detail. Higher quality images will capture more detail and
will also produce larger files. To change the recording resolution, please follow the
instructions below.
1. Enter the Photo screen.
2. Press the Button to enter the Photo Menu.
M
3. Use the
and
setting and press
4. Use the and
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.
Buttons to navigate the Photo Menu and highlight the
OK
to select.
Buttons to highlight either OFF or ON, then press the
Buttons to navigate the Photo Menu and highlight the Quality
OK
to select.
Buttons to highlight your required quality, then press the
OK
OK
17