Sharpness; White Balance - NANO CAM NCP-DVRGPS User Manual

3.1.5 Sharpness

Sharpness sets the boldness of the image. Images with a stronger sharpness will
create bolder images with stronger outlines. To change the photo Sharpness, please
follow the instructions below.
1. Enter the Photo screen.
2. Press the
3. Use the
Sharpness setting and press
4. Use the
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.

3.1.6 White Balance

The White Balance setting is used to manually adjust the settings used to
counteract different light conditions. This setting is set to Auto by default. To change
the White Balance setting follow the instructions below.
1. Enter the Photo screen.
2. Press the
3. Use the
Balance setting and press
4. Use the
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.
18
Button to enter the Photo Menu.
M
and Buttons to navigate the Photo Menu and highlight the
OK
to select.
and Buttons to highlight your required sharpness, then press the
Button to enter the Photo Menu.
M
and Buttons to navigate the Photo Menu and highlight the White
OK
to select.
and Buttons to highlight your required setting, then press the
OK