G Sensor; Gps - NANO CAM NCP-DVRGPS User Manual

2.8.8 G Sensor (Gravity Sensing)
The G Sensor defines the required force needed to trigger emergency recording.
Once Emergency recording is triggered the current recording will be saved and
protected from being saved over by the normal loop recording. To set the required
sensitivity please follow the instructions below.
OK
1. Press the Button to stop the Car DVR from recording.
2. Press the Button to enter the Video Menu.
M
3. Use the and
Sensing setting and press
4. Use the and
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. If your memory card is filling up quickly you may need to lower the sensitivity of the G
Sensor ( Gravity Sensor) to decrease the number of triggers caused by normal driving.

2.8.9 GPS

The Car DVR's built in GPS sensor will record the speed and location of your vehicle
and encode the data into the recorded files. This can be activated or deactivated
using the GPS setting in the Car DVR's video menu. To activate or deactivate this,
please follow the instructions below.
OK
1. Press the Button to stop the Car DVR from recording.
2. Press the Button to enter the Video Menu.
M
3. Use the and
setting and press
4. Use the and
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. GPS tracking can only be played back using the included 'Driving Recorder Player'
Software.
Buttons to navigate the Video Menu and highlight the Gravity
OK
to select.
Buttons to highlight either OFF or ON, then press the
Buttons to navigate the Video Menu and highlight the GPS
OK
to select.
Buttons to highlight your required setting, then press the
OK
OK
15