Getting Started; Inserting The Memory Card; Installing Car Dvr; Adjust The Device Position - NANO CAM NCP-DVRGPS User Manual

2. Getting Started

2.1 Inserting Memory Card
With the Car DVR turned off and the screen facing towards you insert the memory card with the text on the Micro SD card facing toward
you. Push the memory card in until a click is heard.
To remove the memory card
Ensure that the Car DVR is powered off, push the memory card until a click is heard and release the card to eject.
2.2 Installing the Car DVR
1. Remove the protective stickers from the Car DVR and the Suction Mount.
2. Slot the mount bracket into the socket on the top of the Car DVR and with the screen facing you, slide the bracket from left to
right until the bracket locks in place.
3. Connect the GPS plug to the Car DVR.
4. With the GPS module in the down position attach the suction cup to the windscreen.
5. Press the mount base firmly against the windscreen and switch the GPS module to the up position.

2.2.1 Adjust the device position

1. Loosen the knob on the right hand side of the mounting bracket, and adjust the vertical and horizontal angle of the camera.
2. Tighten the knob to lock the position of the camera.
2.2.2 Connecting to Power
Only use the included charger to power and charge the Car DVR.
1. Once the Car DVR is securely installed on your vehicle's windscreen, plug the 12v charger into your vehicle's cigarette lighter.
2. Run the cable along your vehicle's console and windscreen and plug the USB Micro plug into the Car DVR.
Note:
1. Do not remove or insert the memory card while the Car DVR is turned on as this may
damage the memory card or corrupt the memory cards stored data.
2. Please use a Class 6 or higher rated micro SD card with a maximum capacity of 32GB.
3. Please format the Micro SD card before the initial use.
4. When removing the memory card, be careful as the card may eject quickly.
Note:
1. It is recommended that the Car DVR is installed behind your vehicle's rear view
mirror.
2. Make sure that the camera view is not obstructed by any window tint or any
other objects.
3. When removing the suction mount be sure to release the it by switching the
GPS module to the down position.
7