Loop Recording; Wdr - NANO CAM NCP-DVRGPS User Manual

2.8.2 Loop Recording

Loop recording allows you to set the duration that the camera will record before
creating a new clip. To set the clip length please follow the instructions below.
1. Press the
2. Press the
3. Use the
Recording setting and press
4. Use the
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. Selecting the OFF option will create the longest possible clip, in most cases depending on
the set resolution and other factors this will be limited to 10MB.
3. To avoid filling the card quickly it is advised to use the 2 or 3 minute options.

2.8.3 WDR

The WDR setting increases the dynamic range of the camera. To turn this setting on
or off, please follow the instructions below.
1. Press the
2. Press the
3. Use the
setting and press
4. Use the
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
12
OK
Button to stop the Car DVR from recording.
Button to enter the Video Menu.
M
and Buttons to navigate the Video Menu and highlight the Loop
OK
to select.
and Buttons to highlight your required Clip Length, then press the
OK
Button to stop the Car DVR from recording.
Button to enter the Video Menu.
M
and Buttons to navigate the Video Menu and highlight the WDR
OK
to select.
and Buttons to highlight either OFF or ON, then press the
OK