Beep Sound; Language - NANO CAM NCP-DVRGPS User Manual

3.2.3 Beep Sound

The Beep Sound setting is used to turn Off or On the beep that indicates a key
press. To adjust the key beep settings, follow the instructions below.
1. Ensure that the DVR is not recording.
2. Press the Button to enter the Video or Photo Menu.
M
3. Press the Button again to enter the Settings Menu.
M
4. Use the and
Sound setting and press
5. Use the and
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Settings Menu which can be accessed
via the Video and Photo Menus.

3.2.4 Language

The Language setting is used to select your preferred Language in the menus. To
set the systems language follow the instructions below.
1. Ensure that the DVR is not recording.
2. Press the Button to enter the Video or Photo Menu.
M
3. Press the Button again to enter the Settings Menu.
M
4. Use the and
Language setting and press
5. Use the
and
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Settings Menu which can be accessed
via the Video and Photo Menus.
Buttons to navigate the Settings Menu and highlight the Key
OK
to select.
Buttons to highlight either OFF or ON, then press the
Buttons to navigate the Settings Menu and highlight the
OK
to select.
Buttons to highlight your preferred Language, then press the
OK
23