Delayed Shutdown; Default Settings - NANO CAM NCP-DVRGPS User Manual

3.2.9 Delayed Shutdown

The Delayed Shutdown setting is used to set how long the camera will continue
recording after you power off our vehicle. To adjust the Delayed Shutdown setting,
follow the instructions below.
1. Ensure that the DVR is not recording.
2. Press the
3. Press the
4. Use the
Delayed Shutdown setting and press
5. Use the
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Settings Menu which can be accessed
via the Video and Photo Menus.

3.3.0 Default Settings

Default Settings is used to revert the NCP-DVRGPS's settings to their default
settings. To reset the camera to restore the default settings, please follow the
instructions below.
1. Ensure that the DVR is not recording.
2. Press the
3. Press the
4. Use the
Default Settings setting and press
5. Use the
your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Settings Menu which can be accessed
via the Video and Photo Menus.
26
Button to enter the Video or Photo Menu.
M
Button again to enter the Settings Menu.
M
and Buttons to navigate the Settings Menu and highlight the
OK
and Buttons to highlight your preferred setting, then press the
Button to enter the Video or Photo Menu.
M
Button again to enter the Settings Menu.
M
and Buttons to navigate the Settings Menu and highlight the
OK
and Buttons to highlight OK, then press the
to select.
to select.
button to confirm
OK
OK