Setting Menu; Date/Time; Auto Power Off - NANO CAM NCP-DVRGPS User Manual

3.2 Setting Menu

This menu is used to edit the cameras operational settings. This menu can be accessed
through either the Video or Photo menu by pressing the
menus. While in this menu the
to select the highlighted setting.

3.2.1 Date/Time

The Date/Time setting is used to set the cameras internal clock. To set the internal
clock follow the instructions below.
1. Ensure that the DVR is not recording.
2. Press the
3. Press the
4. Use the
Time setting and press
5. Use the
and progress to the next digit. The final field sets the format that the date will be presented in, pressing
highlighted will save the date and time and return you to the Settings Menu.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Once the time and date is set it can be stamped onto your footage using the Date Stamp setting. Please see section Date Stamp
for more details

3.2.2 Auto Power Off

Auto Power Off is used to set the duration of inactivity before the camera will power
down. To set Auto Power Off follow the instructions below.
1. Ensure that the DVR is not recording.
2. Press the
3. Press the
4. Use the
power Off setting and press
5. Use the
down the DVR, then press the
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Settings Menu which can be accessed
22
via the Video and Photo Menus.
and buttons are used to navigate and the
Button to enter the Video or Photo Menu.
M
Button again to enter the Settings Menu.
M
and Buttons to navigate the Settings Menu and highlight the Date/
OK
to select.
and buttons to edit the selected digit and the
Button to enter the Video or Photo Menu.
M
Button again to enter the Settings Menu.
M
and Buttons to navigate the Settings Menu and highlight the Auto
OK
to select.
and Buttons to highlight the duration of inactivity required to power
OK
button to confirm your selection.
whilst in either of these
M
OK
button
OK
button to confirm
OK
with this field