Recording Audio; Date Stamp - NANO CAM NCP-DVRGPS User Manual

2.8.6 Recording Audio

The Recording Audio setting allows you to mute the microphone during recording,
or set it to record. To set your recording preferences, please follow the instructions
below.
1. Press the
2. Press the
3. Use the
Recording Audio setting and press
4. Use the
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.

2.8.7 Date Stamp

Date stamp will stamp the current date onto the footage for future reference. To set
the date stamp please follow the instructions below.
1. Press the
2. Press the
3. Use the
Stamp setting and press
4. Use the
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. For date stamp to be correct the time and date must be set first. To set the time and date
please see section Date/Time.
14
OK
Button to stop the Car DVR from recording.
Button to enter the Video Menu.
M
Buttons to navigate the Video Menu and highlight the
and
OK
and Buttons to highlight either OFF or ON, then press the
OK
Button to stop the Car DVR from recording.
Button to enter the Video Menu.
M
and Buttons to navigate the Video Menu and highlight the Date
OK
to select.
and Buttons to highlight either OFF or ON, then press the
to select.
OK
OK