Photo Mode; Photo Menu; Capture Mode; Resolution - NANO CAM NCP-DVRGPS User Manual

3. Photo Mode

This screen is used to capture still images using your Car DVR. To access the Photo
screen ensure that the camera is not recording and hold the
3 seconds. Photo mode also has a menu which is used to edit the photo settings. This
menu can be accessed by pressing the

3.1 Photo Menu

3.1.1 Capture Mode

Capture mode is used to set a delayed timer. To set a timer delay follow the
instructions below.
1. Enter the Photo screen.
2. Press the
3. Use the
Mode setting and press
4. Use the
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
are in the Photo screen when you access the menu.

3.1.2 Resolution

Resolution sets the still image quality. Higher resolution images will capture more
detail and will also produce larger files. To change the photo resolution, please follow
the instructions below.
1. Enter the Photo screen.
2. Press the
3. Use the
Resolution setting and press
4. Use the
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2. This setting can only be accessed through the Photo Menu, please make sure that you
16
are in the Photo screen when you access the menu.
(Menu/Mode) in the Photo Screen.
M
Button to enter the Photo Menu.
M
and Buttons to navigate the Photo Menu and highlight the Capture
OK
to select.
and Buttons to highlight your required timer delay, then press the
Button to enter the Photo Menu.
M
and Buttons to navigate the Photo Menu and highlight the
OK
to select.
and Buttons to highlight your required resolution, then press the
(Menu/Mode) button for
M
OK