QUICK REVIEW
Quick review displays the photo on screen for the set amount of time after the photo has been taken� To change the Quick Review setting
follow the instructions below�
1� Enter the Photo screen�
2� Press the Button to enter the Photo Menu�
3� Use the Up and Down Buttons to navigate the Photo Menu and highlight the Quick Review setting and press OK (Rec/Ok) to
select�
4� Use the Up and Down Buttons to highlight your required image display time setting, then press the OK (Rec/Ok) button to confirm
your selection�
Note:
• Menus cannot be accessed while the camera is recording� Please stop the recording before attempting to access the menu�
• This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the
menu�
32