Sequence; Quality - NANO CAM NCP-DVRFHD User Manual

SEQUENCE

When Sequence is activated, when a photo is triggered a sequence of 3 photos is taken� To activate or deactivate Sequence mode,
follow the instructions below
1� Enter the Photo screen�
2� Press the  Button to enter the Photo Menu�
3� Use the  Up and  Down Buttons to navigate the Photo Menu and highlight Sequence setting and press OK (Rec/Ok) to select�
4� Use the  Up and  Down Buttons to highlight OFF or ON, then press the OK (Rec/Ok) button to confirm your selection�
Note:
• Menus cannot be accessed while the camera is recording� Please stop the recording before attempting to access the menu�
• This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the
menu�

QUALITY

Quality sets the image detail� Higher quality images will capture more detail and will also produce larger files� To change the recording
resolution, please follow the instructions below�
1� Enter the Photo screen�
2� Press the  Button to enter the Photo Menu�
3� Use the  Up and  Down Buttons to navigate the Photo Menu and highlight the Quality setting and press OK (Rec/Ok) to select�
4� Use the  Up and  Down Buttons to highlight your required quality, then press the OK (Rec/Ok) button to confirm your selection�
27