G SENSOR (GRAVITY SENSING)
The G Sensor defines the required force needed to trigger emergency recording� Once Emergency recording is triggered the current
recording will be saved and protected from being saved over by the normal loop recording� To set the required sensitivity please follow the
instructions below�
1� Press the OK (Rec/Ok) Button to stop the Car DVR from recording�
2� Press the Button to enter the Video Menu�
3� Use the Up and Down Buttons to navigate the Settings Menu and highlight the Gravity Sensing setting and press OK (Rec/ Ok) to
select�
4� Use the Up and Down Buttons to highlight either OFF or ON, then press the OK (Rec/Ok) button to confirm your selection�
Note:
• Menus cannot be accessed while the camera is recording� Please stop the recording before attempting to access the menu�
• If your memory card is filling up quickly you may need to lower the sensitivity of the G Sensor (Gravity Sensor) to decrease the number
of triggers caused by normal driving�
22