Loop Recording - NANO CAM NCP-DVRFHD User Manual

LOOP RECORDING

Loop recording allows you to set the duration that the camera will record before creating a new clip� To set the clip length please follow
the instructions below�
1� Press the OK (Rec/Ok) Button to stop the Car DVR from recording�
2� Press the  Button to enter the Video Menu�
3� Use the  Up and  Down Buttons to navigate the Settings Menu and highlight the Loop Recording setting and press OK (Rec/Ok) to
select�
4� Use the  Up and  Down Buttons to highlight your required Clip Length, then press the OK (Rec/Ok) button to confirm your selection�
Note:
• Menus cannot be accessed while the camera is recording� Please stop the recording before attempting to access the menu�
• Selecting the OFF option will create the longest possible clip, in most cases depending on the set resolution and other factors this will
be limited to 10MB�
• To avoid filling the card quickly it is advised to use the 1 or 2 minute options�
18