Omnitron Systems Technology Omnitron 8000-0 User Manual page 10

The Management Options screen will be displayed.
Management Options
Network Management
1: Chassis and Module Management
2: Set Module Identifier
Management Module Preferences
3: IP and Control Preferences
4: SNMP Preferences
5: Abandon Preference Changes
6: Save Preference Changes
7: Restore to Factory Defaults
8: Restart Management Module
9: Other Networking Features
Management Module Maintenance
10: Firmware Update
11: Set Date/Time
IP Address = 192.168.1.220
Chassis Number = 1
Enter Choice, (H)elp, E(x)it >
A new NMM does not have a password, and will skip the Password Entry screen and go straight to the
Management Options screen. If a password has been set, the Password Entry screen will be displayed.
Type the password and press <ENTER>, the NMM will respond with the Management Options screen.
Omnitron Systems Technology, Inc.
Copyright 2001-2007 OST, Inc.
------------------------------------------------------------------------------
Omnitron Systems Technology
140 Technology #500
Irvine, CA 92618
------------------------------------------------------------------------------
IP Address 192.168.1.220
MAC 00:00:00:00:00:00
[xxxxxxxx]
Please enter the password >
iConverter, Serial Agent
iConverter, Serial Agent
Technical Support:
Sales/Products:
On the web at:
Page 10
Password Entry
(949) 250-6510
(800) 675-8410
www.omnitron-systems.com