Table of Contents
Advertisement
3.4.2
Setting SNMP Preferences
To set the SNMP Preferences for the NMM, select 4 from the Management Options screen, press <ENTER>
to enter the SNMP Preferences screen.
SNMP Preferences Screen
Chassis Number
= 1
1: sysContact
2: sysLocation
3: SNMP Writes
SNMP v1/v2c -------------------------------------------------------------------
4: Read Community
5: Write Community
6: Agent
SNMP V3 -----------------------------------------------------------------------
7: Agent
8: User 1 name (read only)
9: User 2 name (read/write) admin
10: User 1 Security
11: User 1 Privacy pwd
12: User 1 Authen. pwd
Traps Hosts -------------------------------------------------------------------
16: Address 1
17: Address 2
18: Address 3
19: Address 4
Enter Choice, Management Options Screen(0), (H)elp, E(x)it >
3.4.2.1
Setting SNMPv1/v2c Read and Write Community Names
The NMM is shipped from the factory with the SNMP agent enabled with the default SNMP Read and
Write Community name as "public". See Section 3.4 for all factory default settings.
The SNMP Read Community Name is necessary for reading data from the NMM. The name can be any 1-
32 character alphanumeric string. To set the SNMP Read Community Name, select 4 at the SNMP
Preferences screen, press <ENTER> and then follow the screen prompts.
The SNMP Write Community Name is necessary for writing data to the NMM. The name can be any 1-32
character alphanumeric string. To set the SNMP Write Community Name, select 5 at the SNMP Preferences
screen, press <ENTER> and then follow the screen prompts.
To save the new values, select 0 and press <ENTER> to return to the Management Options screen, then
select 6 and press <ENTER> to Save Preference Changes.
3.4.2.2
Setting SNMPv3 Parameters
SNMPv3 implements a security model that provides for message integrity, authentication, and encryption.
Authentication for SNMPv3 is provided through a unique User Name and Authentication Password for
each access level.
Two access levels or accounts are available; Read-Only Level (User 1) and Read and Write Level (User 2).
User 1 is allowed to request information from the module. User 2 is allowed to request information from
and set configuration to the module. To set the User 1 name, select 8 at the SNMP Preferences screen,
press <ENTER> and then follow the screen prompts. To set the User 2 name, select 9 at the SNMP
Preferences screen, press <ENTER> and then follow the screen prompts. The NMM is shipped with
default values pre-assigned. See Section 3.4 for all factory default settings.
SNMP Engine ID 80001CAE03000687003B19
Omnitron (949) 250-6510
Irvine, CA USA
Enabled
*****
*****
Enabled
Enabled
guest
noAuthNoPriv 13: User 2 Security
*****
*****
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
iConverter, Serial Agent
14: User 2 Privacy pwd
15: User 2 Authen. pwd
20: Address 5
255.255.255.255
21: Address 6
255.255.255.255
22: Address 7
255.255.255.255
23: Address 8
255.255.255.255
Page 14
noAuthNoPriv
*****
*****
Advertisement
Table of Contents
