Omnitron Systems Technology Omnitron 8000-0 User Manual page 17

switch settings, then the module's hardware settings take effect.
To set the Soft-switch Reload function, select 8 at the IP and Control Preferences screen, press <ENTER>
and then follow the screen prompts to change the setting.
IP and Control Preferences Screen
1: Set IP
2: Set Subnet Mask
3: Set Gateway
4: Chassis Number
5: Chassis Name (also sysName)
6: Enable/Disable TELNET
7: Enable/Disable FTP
8: Enable/Disable Soft Switch Reload
9: TELNET Password
10: FTP Password
11: Serial Password
Enter Choice, Management Options Screen(0), (H)elp, E(x)it >
To save the new values, select 0 and press <ENTER> to return to the Management Options screen, then
select 6 and press <ENTER> to Save Preference Changes.
iConverter, Serial Agent
192.168.1.220
255.255.255.0
192.168.1.1
1
NMM
Enabled
Disabled
Disabled
*****
Page 17