Omnitron Systems Technology Omnitron 8000-0 User Manual page 19

Network management module
Table of Contents

Advertisement

IP and Control Preferences Screen
1:
Set IP
2:
Set Subnet Mask
3:
Set Gateway
4:
Chassis Number
5:
Chassis Name (also sysName)
6:
Enable/Disable TELNET
7:
Enable/Disable FTP
8:
Enable/Disable Soft Switch Reload
9:
TELNET Password
10: FTP
Password
11: Serial Password
Enter Choice, Management Options Screen(0), (H)elp, E(x)it >6
Disable TELNET (Y/N)?>
To save the new values, select 0 and press <ENTER> to return to the Management Options screen, then
select 6 and press <ENTER> to Save Preference Changes.
The NMM may be accessed and configured via Telnet using any standard Telnet client. Only one Telnet
session can be active at a time. An inactive Telnet session terminates automatically after 5 minutes.
3.4.5.3
Updating the NMM Firmware via the Serial Console Port
To update the NMM firmware from the Serial Console Port, select 10 at the Management Options screen,
press <ENTER>. The NMM will display the following:
Management Options
Network Management
1:
Chassis and Module Management
2:
Set Module Identifier
Management Module Preferences
3:
IP and Control Preferences
4:
SNMP Preferences
5:
Abandon Preference Changes
6:
Save Preference Changes
7:
Restore to Factory Defaults
8:
Restart Management Module
9:
Other Networking Features
Management Module Maintenance
10: Firmware Update
11: Set Date/Time
IP Address
= 192.168.1.220
Chassis Number = 1
Enter Choice, (H)elp, E(x)it > 10
UPDATE: Are you sure? (Y/N) > Y
Please Xmodem file now:
From the terminal program, use the Xmodem protocol to send the new NMM-xxx.bin firmware file to the
NMM (where xxx represents the release level of the software).
Once the file transfer begins, the data uploads to the NMM. The process takes about five minutes over a
serial connection.
When the upload is complete, the NMM displays the update status and then automatically restarts with the
newly loaded firmware.
iConverter, Serial Agent
192.168.1.220
255.255.255.0
192.168.1.1
1
NMM
Enabled
Disabled
Disabled
*****
iConverter, Serial Agent
Page 19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iconverter

Table of Contents