Omnitron Systems Technology iConverter CWDM/X User Manual

Model Numbers
Model
Model Type
Number
8870-0
8871-0
2-Channel
MUX/DEMUXw
8872-0
8873-0
8874-0
8875-0
8874-1
8875-1
4-Channel
MUX/DEMUXw
8876-0
8877-0
8876-1
8877-1
sSingle-fiber CWDM/X models must be used in pairs. The Tx wavelengths on one end has to match the Rx wavelengths
on the other.
1
EXP port supports 1471nm to 1611nm. Use with 8870-0, 8871-0, 8872-0, 8873-0, 8876-0 or 8877-0.
2 EXP port supports 1271nm to 1451nm. Use with 8874-0 or 8875-0.
Warranty
The operating description in this Instruction Manual is for use by qualified personnel only. To avoid electrical shock, do not perform any
servicing of this unit other than that contained in the operating instructions, unless you are qualified and certified to do so by Omnitron
Systems Technology.
This product is warranted to the original purchaser against defects in material and workmanship for a period of ONE YEAR from the date
of shipment. You may register your product on the Internet at http://www.omnitron-systems.com. During the warranty period, Omnitron
will, at its option, repair or replace a product which is proven to be defective.
For warranty service, the product must be sent to an Omnitron designated facility, at Buyer's expense. Omnitron will pay the shipping
charge to return the product to Buyer's designated US address using Omnitron's standard shipping method.
The foregoing warranty shall not apply to defects resulting from improper or inadequate use and/or maintenance of the equipment by
Buyer, Buyer-supplied equipment, Buyer-supplied interfacing, unauthorized modifications or tampering with equipment (including removal
of equipment cover by personnel not specifically authorized and certified by Omnitron), or misuse, or operating outside the environmental
specification of the product (including but not limited to voltage, ambient temperature, radiation, unusual dust, etc.), or improper site
preparation or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied warranties of merchantability and fitness for any
particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron shall not be liable for any direct, indirect, special,
incidental, or consequential damages, whether based on contract, tort, or any legal theory.
Omnitron Systems Technology * 140 Technology Dr. #500 * Irvine, CA 92618
949.250.6510 tel * 949.250.6514 fax * www.omnitron-systems.com
Channel Port
ITU Center Wavelength (nm)
Tx/Rx
1471/1491, 1511/1531
1491/1471, 1531/1511
1551/1571, 1591/1611
1571/1551, 1611/1591
1271/1291, 1311/1331, 1351/1371, 1431/1451
1291/1271, 1331/1311, 1371/1351, 1451/1431
1271/1291, 1311/1331, 1351/1371, 1431/1451
1291/1271, 1331/1311, 1371/1351, 1451/1431
1471/1491, 1511/1531, 1551/1571, 1591/1611
1491/1471, 1531/1511, 1571/1551, 1611/1591
1471/1491, 1511/1531, 1551/1571, 1591/1611
1491/1471, 1531/1511, 1571/1551, 1611/1591
WARNING
Warranty
Limitation of Warranty
Exclusive Remedies
040-08870-001A 1/09
Expansion
Port
No 2 and 4 Channel Single-Fiber MUX/DEMUX
No
No
No
No
No
Yes 1
Yes 1
No
No
Yes 2
pairs (example: model 8870-0 used with 8871-0). The transmit wavelength of the Channel
Yes 2
Port at one end must match the receive wavelength of the same Channel Port at the other
end, and the receive wavelength of the Channel Port at one end must match the transmit
wavelength of the same Channel Port at the other end.
2-Channel CWDM/X modules support four wavelengths; two transmit and two receive.
4-Channel Single-Fiber CWDM/X modules support eight wavelengths and feature an optional
Expansion Port (EXP) that can be used to cascade two MUX/DEMUX modules, doubling the
channel capacity from 4-Channels to 8-Channels on the single-fiber link.
Port Definitions
Figure 1: Port Locations for 2-Channel CWDM/X Module
Figure 2: Port Locations for 4-Channel CWDM/X Module
iConverter CWDM/X
USER MANUAL
Product Overview
iConverter
The Single-Fiber Course Wave Division
MUX/DEMUX CWDM/X modules utilize a single-
fiber Common Port that aggregates two different
wavelengths from each dual fiber Channel Port. Each
fiber strand on the Channel Port supports a different
wavelength, one wavelength for transmit (Tx) and a
different wavelength for receive (Rx).
Single-Fiber CWDM/X modules are always used in
Page 1