Filling/Bleeding The Cooling System - KTM 125 Duke Owner's Manual

COOLING SYSTEM

Filling/bleeding the cooling system

14.5
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
x
–
Remove radiator cap
B00767-11
–
Remove bleeder screw
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the vent hole, and then mount and
tighten the bleeder screw immediately.
Alternative 1
Coolant (
Alternative 2
Coolant (mixed ready to use) (
B00769-10
–
Fill the radiator completely with coolant. Mount the radiator cap.
.

.

p. 145)
p. 145)
115