Filling/Bleeding The Cooling System - KTM 690 Duke AUS/UK 2014 Owner's Manual

Table of Contents

Advertisement

15
COOLING SYSTEM
15.5

Filling/bleeding the cooling system

Warning
Danger of poisoning Coolant is poisonous and a health hazard.
Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water immedi-
ately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If coolant is swallowed,
contact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of children.
Stand the motorcycle upright.
Place a suitable container under the engine.
Remove screw
Completely drain the coolant.
Mount screw
Guideline
Plug, drain hole of water pump
B00984-10
x
Remove radiator cap
B00983-11
1
. Remove the radiator cap.
1
with a new seal ring and tighten it.
1
.
M10x1
15 Nm
(11.1 lbf ft)
142

Advertisement

Table of Contents
loading

Table of Contents