TUNING THE CHASSIS
–
Loosen nuts
–
Adjust the shift lever by turning shift rod
Guideline
Shift rod adjustment range
Info
Make the same adjustments on both sides.
At least five screw threads must be screwed into the seating.
–
Tighten nuts
Info
After the counter nuts have been tightened, the bearings of the shift shaft must
be central and aligned identically to each other in order to ensure freedom of
movement in the bearing shells.
–
Check the shift lever to ensure it is functioning properly and can move freely.
B00780-10
.
.
.
100... 112 mm (3.94... 4.41 in)
63