SERVICE WORK ON THE ENGINE
–
Remove the front spoiler. (
–
Stand the motorcycle on its side stand on a horizontal surface.
–
Place a suitable container under the engine.
–
Remove oil drain plug
–
Completely drain the engine oil.
–
Clean the oil drain plug and oil screen thoroughly.
–
Position oil screen
Guideline
Oil drain plug
B00774-10
–
Remove screws
–
Pull oil filter
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing area.
B00775-10
p. 75)
and oil screen
and mount and tighten oil drain plug
. Remove the oil filter cover
out of the oil filter housing.
.
with the O-ring.
M24
20 Nm
(14.8 lbf ft)
with the O-ring.
121