Table of Contents
Advertisement
16 COOLING SYSTEM
16.5
190
F00765-10
Filling/bleeding the cooling system
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
Main work
–
Position the motorcycle upright.
–
Position an appropriate container under the engine.
–
1
Remove screw
with the seal ring.
–
Remove the radiator cap.
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Screw plug, water
pump drain hole
1
with a new seal ring.
M6
10 Nm (7.4 lbf ft)
Advertisement
Table of Contents
