Adding Engine Oil - KTM 125 Duke Owner's Manual

SERVICE WORK ON THE ENGINE

Adding engine oil

16.3
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Check the engine oil level. (
–
Remove the oil filler plug
engine oil.
Engine oil (SAE 15W/50) (
Engine oil (SAE 10W/40) (
Info
For optimal performance of the engine oil, do not mix different types of engine
oil.
If appropriate, change the engine oil.
B00773-10
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
–
Start the engine and check that it is oil-tight.
–
Check the engine oil level. (
p. 120)
with the O-ring from the clutch cover and fill up with

p. 146)
p. 146)
p. 120)
123