KTM 125 Duke Owner's Manual page 63

SERVICE SCHEDULE
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and bellows for cracking, leaks, and correct rout-
ing.
x
Check the antifreeze and coolant level. (
Check the cables for damage and routing without sharp bends.
Check that the throttle cables are undamaged, routed without sharp bends, and set correctly.
Change the air filter. Clean the air filter box.
Check the screws and nuts for tightness.
Change the front brake fluid.
Change the rear brake fluid.
Check the headlight setting. (
Check that the radiator fan is functioning properly.
Final check: Check the vehicle for roadworthiness and take a test ride.
Read out the fault memory using the KTM diagnostics tool after a test ride.
Make the service entry in KTM DEALER.NET and in the service record.
K10N: Once after 1,000 km (621.4 mi)
K50A: Every 5,000 km (3,107 mi) or every year
K100A: Every 10,000 km (6,214 mi) or every 2 years
p. 110)
x
x
x
x
p. 106)
x
x
x
x
K10N K50A
•
•
•
x
•
•
•
•
•
•
61
K100A
•
• •
• •
• •
• •
• •
•
•
• •
• •
• •
• •
• •