Filling/Bleeding The Cooling System - KTM 390 Duke AUS 2013 Owner's Manual

Hide thumbs Also See for 390 Duke AUS 2013:
Table of Contents

Advertisement

15
COOLING SYSTEM
15.5

Filling/bleeding the cooling system

Warning
Danger of poisoning Coolant is poisonous and a health hazard.
Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water immedi-
ately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If coolant is swallowed,
contact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of children.
Main work
Stand the motorcycle upright.
Place a suitable container under the engine.
Remove screw
Remove the radiator cap.
Completely drain the coolant.
Mount screw
Guideline
101912-10
Plug, water pump drain hole
x
Remove radiator cap
101911-11
.
1
with a new seal ring and tighten it.
1
.
1
M6
8 Nm (5.9 lbf ft)
138

Advertisement

Table of Contents
loading

This manual is also suitable for:

390 duke eu 2013390 duke mal 2013

Table of Contents