Filling/Bleeding The Cooling System - KTM 390 DUKE 2022 Owner's Manual

Warning
Danger of poisoning Coolant is harmful to health.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
16.5

Filling/bleeding the cooling system

Warning
Danger of poisoning Coolant is harmful to health.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
Condition
The engine is cold.
Preparatory work
–
Remove the front spoiler. (
Main work
–
Position the motorcycle upright.
–
Position an appropriate container under the engine.
–
Remove screw
–
Remove the radiator cap.
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
S04750-10
Screw plug, water
pump drain hole
Main work
–
Remove radiator cap
F00856-10
COOLING SYSTEM 16
p. 64)
1
with the seal ring.
1
with a new seal ring.
M6 10 Nm (7.4 lbf ft)
1
.
93