Light Switch; Turn Signal Switch; Horn Button; Overview Of Indicator Lamps - KTM 450 EXC Owner's Manual

CONTROLS

Light switch

5.6

Turn signal switch

5.7

Horn button

5.8

Overview of indicator lamps

5.9

Ignition switch

5.10
Light switch

Possible states
Low beam on – Light switch is turned downward. In this position, the
low beam and tail light are switched on.
High beam on – Light switch is turned upward. In this position, the
high beam and tail light are switched on.
100870-10
Turn signal switch
Possible states
Turn signal light off
Left turn signal on – Turn signal switch pressed to the left. The turn
signal switch returns automatically to the central position after use.
Right turn signal on – Turn signal switch pressed to the right. The turn
signal switch returns automatically to the central position after use.
To switch off the turn signal, press the turn signal switch towards the switch case.
100870-11
Horn button

Possible states
• Horn button
• Horn button
100870-12
Possible states
High beam indicator lamp lights up blue – High beam is switched on.
Turn signal indicator lamp flashes green – Turn signal light is switched
on.
500147-01
The ignition switch
Possible states
Ignition off – In this position, the ignition circuit is interrupted, a run-
ning engine stops, and a non-running engine will not start.
Ignition on – In this position, the ignition circuit is closed, and the
engine can be started.
300396-10
is fitted on the left side of the handlebar.
is fitted on the left side of the handlebar.

is fitted on the left side of the handlebar.
is in home position
is pressed – The horn is sounded in this position.
is on the right behind the headlight mask.

15