Setting The Clock; Adjusting The Speedometer Functions - KTM 450 EXC Owner's Manual

CONTROLS

Setting the clock

5.15

Adjusting the speedometer functions

5.16
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
–
Press the button
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
Condition
The motorcycle is stationary.
–
Press the button
the display.
–
Press the button
The hour display flashes.
–
Set the hour display with the button
–
Press the button
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
400330-01 the button
Info
The seconds can only be set to zero.
–
Press the button
The settings are stored and the Setup menu is closed.
Info
If no button is actuated for 20 seconds or there is no signal from the wheel
speed sensor, then the settings are automatically stored and the Setup
menu closed.
Condition
The motorcycle is stationary.
–
Press the button
display.
–
Press the button
The Setup menu is displayed and the activated functions are shown.
–
Change to the desired function by pressing the button
The selected function flashes.
Activating a function
–
Press the button
400318-01
The symbol remains on the screen and the display changes to the next
function.
Deactivating the function
–
Press the button
The symbol on the screen goes out and the display changes to the next
function.
–
All desired functions are activated or deactivated accordingly.
–
Press the button
The settings are stored and the Setup menu is closed.
for 3 - 5 seconds.
briefly and repeatedly until CLK appears at the bottom right of
for 3 - 5 seconds.
and/or button
briefly.
and the button .
for 3 - 5 seconds.
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
.
.
for 3 - 5 seconds.
17
.
briefly.