Switches On The Left Side Of The Handlebar; Combination Switch; Light Switch; Hazard Warning Flasher Switch - KTM 390 DUKE 2024 Owner's Manual

6 CONTROLS
6.5
6.5.1
6.5.2
6.5.3
14

Switches on the left side of the handlebar

Combination switch

W00460-10

Light switch

W00461-10

Hazard warning flasher switch

W00462-11
The combination switch is fitted on the left side of the handlebar.
Overview of the left combination switch
1 Light switch ( p. 14)
2 Hazard warning flasher switch (
3 Menu buttons ( p. 15)
4 Turn signal switch ( p. 15)
5
Horn button ( p. 15)
1
Light switch is fitted on the left side of the handlebar.
Possible states
Low beam on – Light switch in position
position, the low beam and the tail light are switched
on.
High beam on – Push the light switch to position
In this position, the high beam and the tail light are
switched on.
Headlight flasher – Push the light switch into posi-
C
tion .
The hazard warning flasher switch
combination switch.
The hazard warning flasher is used to indicate emergency situa-
tions.
Info
The hazard warning flasher can be activated or deactivated
while the ignition is switched on or up to 60 seconds after
the ignition is switched off.
Only keep the hazard warning flasher activated as long as
necessary as it depletes the 12-V battery.
Possible states
Hazard warning flasher on – All four turn signals and
the green turn signal indicator lights in the combina-
tion instrument flash.
p. 14)
A
. In this
B
1
is fitted on the top of the
.