First Print - Flashforge DREAMER Quick Start Manual

First Print

1
Adjust the model to the right position in the FlashPrint
software, then click [Print], and a printing options
screen will show up. After the settings are set, click
[OK] to slice and generate Gx file.
2 Copy this Gx file into SD card and insert SD card. Turn
on the Dreamer. Ensure the build plate is leveled and
load the filament in a right way to ensure the filament
is extruding in a straight line.
3 Tap [Print] in the main menu of screen, and then tap
[SD Card] to select the .g file you want to print.
4 Once tap [Print], the Dreamer will start to preheat 5-10
minutes to the operating temperature and then start
the print.
Notes
1. Load the filament for a while to extrude the melted filament out of the extruder that you printed last time.
2. Do not leave the Dreamer unattended during operation.
3. If needed, gently use the scraper to remove the object from build plate to avoid damaging the objects and build plate. If desired,
heat the build plate to 40~50℃
to separate the object from the build plate.
4. Please preheat the heating plate to 50-70 degrees Celsius for printing with PLA.
1
Elephant
Print Time 10:05
Copy
Print
Delete
2
Gx
Elephant
Print Time
0 : 00
L Extruder 25℃
R Extruder 25℃/220℃
Platform 21℃/105℃