Kit Contents - Flashforge DREAMER Quick Start Manual

Kit Contents

Quick Start Guide
1.Don't strip the yellow film of the heating board, which is high temperature resistant tape, making object stick on platform easily.
2.Don't remove the tape that wrap around the nozzle, which is made from ceramic fibre to stabilize the temperature of the nozzle,
Notes
then promote fluency and stability of filament output.
3. If print with PL A filament, please remove the top cover and open the front door to ventilate well for a better printing performance.
1. High Temperature! Platform may have been heated before, make sure it already cools down before inner operation.
Warning
2. Moving parts may cause injury of crushing and scratch, keep your hands naked during operation.
This guide only applys to Dreamer 3D printer of Flashforge 3D Technology
Dreamer 3D Printer Quick Start Guide
Filament Spool*2 Spool Lock*2
Screw Box
Power Cable
Turbofan Baffle
Tweezer Scraper
Parts with
CAUTION 注意 1.
Extruder hot during operation.
使用过程中喷头会发热。
Do Not Touch 请勿触摸 2.
Heating plate hot during operation.
Allow surface to cool before servicing.
使用过程中加热平台会发热，待平台表面冷却后再操作。
USB Cable Build Tape
SD Card
Graver Sensor Cable
are packed in tool box.
Leveling Tool
Tool Box