Removing The Air Filter Box Lid; Installing The Air Filter Box Lid; Removing The Air Filter - KTM 125 SX Owner's Manual

MAINTENANCE WORK ON THE CHASSIS

Removing the air filter box lid

11.24

Installing the air filter box lid

11.25

Removing the air filter

x
11.26
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
–
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
601192-10
–
Pull off the air filter box lid in area
601195-10
–
Insert the air filter box lid into the rear area
601195-11
–
Remove the air filter box lid. (
–
Detach air filter holder
filter with the air filter support.
–
Remove the air filter from the air filter support.
601196-10
of the seat fixation.

M6
sideways and remove it toward the front.

and clip it into the front area

p. 45)
at the bottom and swing it to one side. Remove the air

45
10 Nm (7.4 lbf ft)
.
