Greasing The Steering Head Bearing; Removing The Start Number Plate; Installing The Start Number Plate; Removing The Front Fender - KTM 125 SX Owner's Manual

MAINTENANCE WORK ON THE CHASSIS

Greasing the steering head bearing

11.15

Removing the start number plate

11.16

Installing the start number plate

11.17

Removing the front fender

11.18

Installing the front fender

11.19
x
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
800010-10
–
Remove screw
–
Remove screw
B00308-10
–
Position the start number plate. Mount and tighten screw
Guideline
Remaining screws, chassis
Info
Ensure that the holding lugs engage in the fender.
–
Position the brake line. Position the clamp and mount and tighten screw
B00308-11
–
Remove screws
–
Make sure the spacers remain in place.
B00307-10
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
Info
Make sure the holding lugs engage in the start number plate.
B00307-10
( p. 40)
x
( p. 40)
x
and take off the clamp.

. Take off the start number plate.

M6
. Remove the front fender.

M6
.

10 Nm (7.4 lbf ft)
.

.

10 Nm (7.4 lbf ft)
43