Controls; Clutch Lever; Hand Brake Lever; Throttle Grip - KTM 125 SX Owner's Manual

CONTROLS

Clutch lever

5.1

Hand brake lever

5.2

Throttle grip

5.3

Kill switch

5.4
(All 125/150 models)
The clutch lever
The clutch is hydraulically operated and self-adjusting.
B00001-10
(All 250/300 models)
The clutch lever
The clutch is hydraulically operated and self-adjusting.
B00009-10
Hand brake lever
The hand brake lever is used to activate the front brake.
400196-10
Throttle grip

B00060-10
The kill switch
Possible states
• Kill switch
the engine can be started.
• Kill switch
ning engine stops, and a non-running engine will not start.
B00002-10
is fitted on the left side of the handlebar.

is fitted on the left side of the handlebar.

is located on the right side of the handlebar.

is fitted on the right side of the handlebar.
is fitted on the left side of the handlebar.

in basic position – In this position, the ignition circuit is closed, and
pressed – In this position, the ignition circuit is interrupted, a run-
10