PUTTING INTO OPERATION
Preparations for riding on wet and muddy surfaces
6.6
–
Mount the rain cover for the air filter.
Rain cover for air filter (59006021000)
Info
Read the KTM PowerParts installation instructions.
–
Adjust the carburetor jetting and setting.
Info
B00437-01
Recommendations on the carburetor setting are available from your autho-
rized KTM workshop.
–
Clean the chain.
Chain cleaner (
–
Mount the steel sprocket.
Tip
Do not grease the chain.
–
Clean the radiator fins.
–
Carefully align bent radiator fins.
600868-01
–
If used in sand regularly, replace the piston every 10 operating hours.
–
Seal the air filter box.
Tip
Seal the air filter box at the edges to prevent dirt from entering.
–
Clean the air filter and air filter box.
Info
Check the air filter approx. every 30 minutes.
–
Mount the rain cover for the air filter.
Rain cover for air filter (59006021000)
Info
Follow the KTM PowerParts mounting instructions.
–
Adjust the carburetor jetting and setting.
Info
B00437-01
The recommended carburetor tuning is available from your authorized KTM
workshop.
–
Mount the steel sprocket.
–
Clean the motorcycle. (
–
Carefully align bent radiator fins.
600868-01
p. 115)
x
(
p. 46)
x
p. 83)
18